Canon printer error E05 is usually caused by a dirty ink cartridge, improper installation, or that is not compatible with your printer. Dirtiness can be caused by dried ink that builds up in the printer’s internal circuits over time. This post will explain how to fix Canon’s E05 error.
How to fix Canon Printer Error E05 in Windows PC
These are the steps to fix the E05 error that can be caused by your Canon printer. These solutions should be applied in the same order I have them.
- Reboot the printer.
- Factory reset the printer
- Clean the cartridge and reinstall it.
- Replace the ink cartridge.
These solutions will be explained and I will answer any questions you might have.
1. Reboot the printer
Resetting the printer is the first step to troubleshoot the printer error E05. Once the printer is turned on, hold down the Stop button for approximately 5 seconds to cause it to restart.
Let the printer reboot fully. Now you can test it again to verify if the error persists. Continue with the next solution if you continue to get the error E05.
2] Factory reset of the printer
A factory reset restores the printer to its default configuration, just like other devices. If the E05 error is caused by misconfiguration, a factory reset will resolve it. Here are the steps:
Turn ON the Canon printer and then go to the menu bar option. Use the arrow keys to go to the Setup menu.
Next, navigate to Device Settings and click on the OK button. Next, navigate to Device settings and then click OK.
Give the printer time to finish the factory reset, then test the printer to verify that the problem has been solved.
3. Reinstall the cartridge and clean it.
The cartridge reads the instructions sent to it. No matter how often you use your printer, dust can build up and cause the error that you are seeing. To prevent these problems, it is a good idea to clean your ink cartridge frequently.
Clean your printer’s ink cartridge by turning off the printer. Place the printer on a flat surface, and then open the lid. You will see the ink cartridge installation. You can use your fingers to simultaneously press the click-locks on the cartridge holder’s side.Â
Next, inspect the ink cartridge for any signs of dirt, dried ink or dust. Use a soft tissue or lint-free cloth to clean the ink cartridge’s front side.
After removing the particles, you are able to reinstall the cartridges that you have removed previously and reboot your printer.
4. Replace the ink cartridge
Changing the ink cartridge is another possible solution for E05. If this is happening, it could be because the ink cartridge you have installed is defective.
If all else fails, it is time to visit an electronics shop to purchase ink cartridges.
Related:Â
What does Canon error code E05 mean?
If your Canon printer displays an error code E05, the ink cartridge is dirty or incompatible with your printer.
How can I clean an Canon ink absorber
These are the steps you need to take to clean your Canon ink absorber
- Unplug your printer.
- Open the printer and place the cartridge cradle in the middle of the unit.
- Use a paper napkin to soak up the ink.
- Take the frame off the printer and remove the ink absorber pads.
- Close the printer and replace the ink absorber pads.
How can I fix errors on my Canon printer
The first step to troubleshooting problems with your Canon printer is a simple reset. For 10 seconds, hold the Power button down. Depending on the model of your printer, this button might be called Stop, Reset or Resume.
